FCM-1
Control Module
Brand:
Brochure Link: Download
- Built-in type identification automatically identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1(A) module requires power (for horns, strobes, etc.), or audio (for speakers).
- Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
- LED blink may be deselected globally (affects all devices).
- High noise immunity (EMF/RFI).
- The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms).
- Wide viewing angle of LED.
- SEMS screws with clamping plates for wiring ease.
- Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
- Speaker, and audible/visual applications may be wired for Class B or A (Style Y or Z).
| Item Code: | FCM-1 |
|---|---|
| Normal operating voltage: | 15 to 32 VDC |
| Maximum current draw: | 6.5 mA (LED on) |
| Average operating current: | 350 A direct poll, 375 A group poll with LED flashing, 485 A Max. (LED flashing, NAC shorted.) |
| Maximum NAC Line Loss: | 4 VDC |
| External supply voltage (between Terminals T10 and T11): |
Maximum (NAC): Regulated 24 VDC; Maximum (Speakers): 70.7 V RMS, 50W |
| Drain on external supply: | 1.7 mA maximum using 24 VDC supply; 2.2 mA Maximum using 80 VRMS supply |
| Max NAC Current Ratings: | For class B wiring system, the current rating is 3A; For class A wiring system, the current rating is 2A. |
| Temperature range: | 32°F to 120°F (0°C to 49°C) |
| Humidity range: | 10% to 93% non-condensing |
| Dimensions: | 4.5″ (114.3 mm) high x 4″ (101.6 mm) wide x 1.25″ (31.75 mm) deep. Mounts to a 4″ (101.6 mm) square x 2.125″ (53.975 mm) deep box. |
| Accessories: | SMB500 Electrical Box; CB500 Barrier |
