FMM-1
Monitor Module
Brand:
Brochure Link: Download
FMM-1
- Built-in type identification automatically identifies this device as a monitor module to the control panel.
- Powered directly by two-wire SLC loop. No additional power required.
- High noise (EMF/RFI) immunity.
- SEMS screws with clamping plates for ease of wiring.
- Direct-dial entry of address: 01 – 159 on FlashScan loops; 01 – 99 on CLIP loops.
- LED flashes green during normal operation (programmable option) and latches on steady red to indicate alarm
| Normal Operating Voltage: | 15- 32 VDC |
|---|---|
| Maximum Current Draw: | 5.0 mA (LED on) |
| Average Operating Current: | 375 μA (LED flashing), 1 communication every 5 seconds, 47k EOL |
| Maximum IDC Wiring Resistance: | 1500 Ohms |
| Maximum IDC Voltage: | 11 Volts |
| EOL Resistance: | 47k Ohms |
| Temperature Range: | 0°C to 49°C |
| Humidity Range: | 10% to 93% non-condensing |
