FRM-1
Relay Module
Brand:
Brochure Link: Download
- Built-in type identification automatically identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1(A) module requires power (for horns, strobes, etc.), or audio (for speakers).
- Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
- LED blink may be deselected globally (affects all devices).
- High noise immunity (EMF/RFI).
- The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms).
- Wide viewing angle of LED.
- SEMS screws with clamping plates for wiring ease.
- Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
- Speaker, and audible/visual applications may be wired for Class B or A (Style Y or Z).
| Item Code: | FRM-1 |
|---|---|
| Normal operating voltage: | 15 to 32 VDC |
| Maximum current draw: | 6.5 mA (LED on) |
| Average operating current: | 230 A direct poll; 255 A group poll. |
| EOL resistance: | not used |
| Temperature range: | 32°F to 120°F (0°C to 49°C) |
| Humidity range: | 10% to 93% non-condensing. |
| Dimensions: | 4.5″ (114.3 mm) high x 4″ (101.6 mm) wide x 1.25″ (31.75 mm) deep. Mounts to a 4″ (101.6 mm) square x 2.125″ (53.975 mm) deep box. |
| Accessories: | SMB500 Electrical Box; CB500 Barrier |
