• Certified for seismic applications when used with the appropriate seismic mounting kit.
• Approved for Marine applications when used with listed compatible equipment. See DN-60688.
• One isolated intelligent Signaling Line Circuit (SLC) Style 4, 6
  or 7.
• Up to 159 detectors and 159 modules per SLC; 318 devices
  maximum.
  – Detectors can be any mix of ion, photo, thermal, or multisensor; wireless detectors are available for use with the
  FWSG.
  – Modules include addressable pull stations, normally open
  contact devices, two-wire smoke detectors, notification, or
  relay; wireless modules are available for use with the
  FWSG.
• Optional FWSG Wireless SWIFT Gateway supports wireless
  SLC devices.
• Standard 80-character display.
• Network options:
  – High-speed network for up to 200 nodes (NFS2-3030,
  NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM,
  ONYXWorks, NFS-3030, NFS-640, and NCA).
  – Standard network for up to 103 nodes (NFS2-3030, NFS2-
  640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP300/400, AFP-1010, and AM2020). Up to 54 nodes when
  DVC-EM is used in network paging.
• 6.0 A power supply with four Class A/B built-in Notification
  Appliance Circuits (NAC). Selectable System Sensor,
  Wheelock, or Gentex strobe synchronization.
• Built-in Alarm, Trouble, Security, and Supervisory relays.
• VeriFire® Tools online or offline programming utility. Upload/
  Download, save, store, check, compare, and simulate panel
  databases. Upgrade panel firmware.
• Autoprogramming and Walk Test reports.
• Multiple central station communication options:
  – Standard UDACT
  – Internet
  – Internet/GSM
• 80-character remote annunciators (up to 32).
• EIA-485 annunciators, including custom graphics.
• Printer interface (80-column and 40-column printers).
• History file with 800-event capacity in nonvolatile memory,
  plus separate 200-event alarm-only file.
• Alarm Verification selection per point, with automatic counter.
• Presignal/Positive Alarm Sequence (PAS).
• Silence inhibit and Auto Silence timer options.
• NAC coding functions:
  – March time.
  – Temporal.
  – California two-stage coding.
  – Canadian two-stage.
  – Strobe synchronization.
• Field-programmable on panel or on PC with VeriFire® Tools
  program check, compare, simulate.
• Full QWERTY keypad.
• Battery charger supports 18 – 200 AH batteries.
• Non-alarm points for lower priority functions.
• Remote ACK/Signal Silence/System Reset/Drill via monitor
  modules.
• Automatic time control functions, with holiday exceptions.
• Extensive, built-in transient protection.
• Powerful Boolean logic equations.

System Capacity